If you have the normal Aim Command (not PRO or FLEX), then you don't have to worry about duty cycle as much as it isn't doing turn compensation. For your 15GPA rate, you'd pretty much have to go to at least a 110-08 to 110-10 size. (Even a 110-10 is already at like maxed out at 16MPH at 40PSI). So, if most of your in-crop 15GPA work is.. AIM Command FLEX™ operates through the sprayer's rate controller — including the AFS Pro 700, Viper® 4+ and other ISO Virtual Terminal (VT) displays. Monitor and adjust application rate, spray pressure, boom section status, product tank volume and other operating parameters all from one display. Accurate Spray Mapping:
![[CSGO] This command gives you AIMBOT YouTube](https://i.ytimg.com/vi/WbXxxJs6CVI/maxresdefault.jpg "[CSGO] This command gives you AIMBOT YouTube")
![[CS1.6] How to Change FOV and Get Better Field of](https://i.ytimg.com/vi/uLILBeSlIRg/maxresdefault.jpg "[CS1.6] How to Change FOV and Get Better Field of View For Better AIM")
The AIM Command™ spray system from Case IH takes spray technology to a new level by providing spray pressure control that is independent of application rate and ground speed. This spray technology allows the operator to adjust to the ever-changing conditions present in today's chemical application environment. (). AIM Command Pro uses the same sprayer tips as AIM Command but instead of sectional control it will have individual nozzle control with compensated turn control and the ability to vary your rates any where on your boom. For example you may want to put 20% more chemical behind your sprayer wheels or spray 50% more chemical on the first 20' around.