Hinge cup spacer 38C355B9 Cover cap 38C3508 Boring pattern 9.5 45 3/4" 3/8" pilot hole 1/8" Ø8 Ø35 20.5 13 3. Pre-attached Ø8 dowels installed with Blum knock-in tool or. Loosen installation screws to adjust door position (+/- 1/8"), then retighten.. Hinge cup centerpoint Hinge cup centerpoint and MINIPRESS/ MINIDRILL setback position is 20.5 (13/16") for COMPACT BLUMOTION hinges NOTE: "Maximum door thickness 3/4 Mounting plate attachment 39C/38C series ‒ wraparound 38N series ‒ wraparound/edge mount 38B series ‒ face mount Press-in Pre-attached Ø8 dowels installed with Blum knock-in.
Blum catalogue and technical manual . 21.5 66.5 12 11 3-7 F 39.5 68 30 3-7 F 7 75 Hinge systems 〉 CLIP top BLUMOTION | CLIP top - hinges 〉 Standard application Catalogue 2022/2023 • KA-150 110° hinge Web code DQDELA Planning Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 0 mm) Hinge and front.. Door installation To reinstall, slide hinge onto mounting plate, tighten screws. NOTE: Before finishing hinge installation, place set screw. Large overlay Small overlay. Blum, Inc. 7733 Old Plank Rd. Stanley, NC 28164 800-438-6788 704-827-1345 fax 704-827-0799 www.blum.com Technical specifications subject to change without notice. LIT.HN6400.