Remove your Kenwood car stereo from the dashboard slowly and gently. After years of usage, the plastic material may have become brittle, so don't rush this phase or apply too much pressure to avoid shattering or ruining the gadget. And because it has wires linked to your automobile at the back, if you apply too much force when removing it.. Removing a Sony/Pioneer, Kenwood/JVC etc head unit. From the Automotive Stereo Expert Skill Builder Series
Remove the rubber frame of the Kenwood stereo and set it aside. Step 5. Unscrew the M4x8 screw on the back panel of the stereo to detach it from the dash frame. Step 6. Insert the radio keys or stereo removal tools into either side of the car stereo and press gently but firmly inward. Slowly pull the stereo out using the tools.. The harder method of removing a Kenwood car stereo. If the easier method did not work for you, this one should give you the wanted results. Have in mind that you must first do steps 1 and 2 in the easier way because this harder method is basically just a continuation of that one.